The Towel manufacturer tells you which kinds of craft the towel has

Towel as a necessity in life, but many people do not know what is the towel technology, the following I will introduce the most common towel technology

1.plain weave

The Warp and weft yarns are knitted in one up and one down fashion, with many interlacing points. The Warp and weft threads are held together most closely. Therefore, the plain weave fabric is the strongest in texture and the smoothest in appearance.

2.Spiral

The length of the loop is long and the loop part is spiral treated in the bleaching and dyeing process. The loop length has good water absorption, soft handle, high density and washing resistance, but the pattern of the jacquard loop is unclear. General spiral products using 16s single yarn weaving system.

1. Increase the square meter weight of the towel. The woven towels are thicker. Feel full, no line jacquard clear, concave-convex surface big pattern using one-sided Jacquard.

2. The fiber is slightly more refined than the 16s. The guest is in use process, bibulous sex is better. Fully meet the requirements of foreign-funded hotels on the water absorption of towels.

3. Satin

Towel fabric display area, usually flat weave, but also use a special fabric organization, beautiful and novel pattern, called Platinum Satin. The Hotel Logo Logo Logo Logo LOGO can be clearly displayed.

The advantages of platinum satin products: 16s or 21s than 32s / 2 of the hair ring to long, good water absorption; General Hotel Jacquard Jacquard Shop Logo, will feel uneven, logo effect is not obvious, easy to be broken when washing, platinum satin towel at both ends of the gap In the gap can be embroidered, can highlight the hotel logo, and embroidery thread can be used in a variety of colors of embroidery thread, this thread is not out of color, so the hotel logo can be embroidered into two colors, guests living in the hotel can be distinguished when using, the hotel can also be washed separately. DISADVANTAGES: Gap Embroidery Washing will have some deformation, size will be a little change.

4.Jacquard

The fluffing part of the Towel Jacquard process operation, according to the needs of customers, put forward a variety of beautiful patterns, cleverly show the hotel LOGO, store LOGO, etc. .

5.Ultra high density

As the density of warp and weft increases, the density of interlacing points also increases, which directly improves the jacquard effect of the towel. The specific performance is as follows: The hotel logo in the towel is more distinct, the clarity is higher, the expression of the name of the shop is more delicate More conducive to the accurate delivery of the overall design of the connotation, a high-level reproduction of the name, the original style of the logo, with a more realistic visual effect to enhance the image of the hotel.

6, the ordinary towel loop cut treatment, so that the fabric surface is covered with smooth plush, cut plush towel can be cut both sides, can also be cut on one side, the other side is still loop. Conventional are one-sided cut velvet, disadvantages: easy to shed when washing. Cut Down Towels are characterized by softness, comfort, and greater moisture absorption and softness than ordinary towels.

7.Yarn dyed fabric

A towel made of yarn of different colors.

After reading the above towel factory about the classification of towel knowledge, do you have any help?

The Towel manufacturer teaches you how to configure the hotel towel bathrobe correctly

1. Towels

Common manufacturing processes for hotel towel.

Three, quasi-four-star Hotel: 21 / 2 raise bid, 32 S / 2 raise bid, 32 S / 2 Flat Weave Inventory;

five-star hotel: 16s Spiral Jacquard, 16s spiral plain weave, 16s spiral block, 16s flat weave spiral + embroidery label, Stock Platinum Satin Towel;

international brand five-star hotel: 16s spiral flat weaving, 16s spiral satin stalls, a small number of spiral satin stalls towel, 12s flat knitting Terry.

Three or four stars:

Face towel, size not less than 32cm * 32cm, weight not less than 60g

Hand Towel, size not less than 70cm * 35cm and weight not less than 140g

Bath mat not less than 75cm * 45cm and not less than 350g in weight

Bath Towel, not less than 140cm * 80cm, not less than 600g in weight

Five Star configuration:

Face towel, size not less than 33cm * 33cm, weight not less than 60g

Hand Towel, size not less than 70cm * 35cm and weight not less than 150g

Bath mat not less than 80cm * 50cm and not less than 400g in weight

Bath Towel, size not less than 150cm * 80cm, weight not less than 650g

2. bathrobes

The conventional bathrobe is Kimono collar and green fruit collar. Our company’s special style is striped bathrobe, yarn-dyed bathrobe, etc. , can be recommended according to different requirements of the hotel.

kimono collar cut down bathrobe

Four Star Rating: no less than 1,000 grams. General Standard: 1100g-1200g

Five-star, international brand five-star : 1200g-1500g

Waffle or printed bathrobe :no special requirements

The weight of the Green Fruit Collar type bathrobe shall not be less than 1100g / ㎡

The hotel supplies manufacturer tells you the bed goods fabric six craft

Today, the hotel supplies manufacturers to teach you how to distinguish between bedding fabric process

1. Tabby:

A fabric made of plain weave is called plain weave. This means that the warp and weft yarns are interlaced every other yarn (i.e. the yarn is 1 up and 1 down) . This kind of cloth is characterized by a lot of interlacing points, firm texture, very scratch, flat appearance, high embroidery fabrics are usually plain fabric.

2.Twill:

Warp and weft yarns are interlaced at least once between two yarns, I. E. 2 up 1 down or 3 up 1 down. Adopt to increase the warp and weft interlace point, change the fabric weave layout, collectively known as twill fabric. This kind of cloth is characterized by its rich strength and strong three-dimensional sense of organization.

3. Tribute silk:

The Warp and weft yarns are interlaced at least once every three yarns, so the satin weave makes the fabric denser and richer. Satin weave products cost more than plain weave and twill weave products of the same kind. The cloth surface is smooth, delicate and soft.

Plain, twill, and Satin are the three most basic ways of interlacing warp and weft threads. There are no specific pros and cons, each has its own characteristics, of which satin is certainly a masterpiece of pure cotton fabric.

4. Jacquard:

The manufacturing technology of Jacquard fabric is complicated. Warp and weft interweave to form different patterns, concave and Convex, can be woven into flowers, birds, fish, insects, birds, animals and other beautiful patterns, large Jacquard and small jacquard.

1.)Small Jacquard: Small Jacquard Fabric Pattern is relatively simple, more simple, my company’s small Jacquard Fabric Satin Bar, Grid, four-line Grid, four-line, Word Grid, one-line grid and so on.

2, )Big Jacquard: Jacquard fabric pattern of large and exquisite, color level clear three-dimensional sense strong, my company’s Jacquard fabric has feather flowers, phoenix flowers, water ripples, morning glory, willow flowers, and so on.

5. Printing:

Printing is on the basis of plain or satin fabric, through bleaching and dyeing, printed on the fabric surface of a variety of patterns. Our printing fabrics are grape flower, maple leaf flower, Lotus branch flower, carnation flower, chocolate bar, etc. .

6.Yarn Dyed Fabric

Refers to the warp and weft threads of cloth of different colors. For example, the warp is red and the weft is white. The advantage of yarn-dyed fabrics is that the yarn is dyed after the woven fabric, its color fastness is better than the general printing fabric, washing is not easy to fade.

What should I pay attention to when Buying Hotel bathrobes

Speaking of the hotel bathrobe everyone should be very familiar with, hotel bathrobe everyone also called it hotel bathrobe, is the clothes worn after a bath, generally speaking towel texture of the bathrobe has a good absorbent.

For those who value health and the pursuit of quality of life, the hotel bathrobe is no less critical and important than the appearance of fashion, wearing a bathrobe can avoid the trouble of changing clothes, reduce clothing on the body, enjoy your leisure time.

In the high-end hotel will be equipped with bath clothes, to facilitate the living of guests, comfortable hotel bath clothes can improve the quality of sleep hotel guests, hotel bath clothes direct contact with our skin, so the selection should be more careful. However, there are many kinds of hotel bathrobes on the market, with different styles, fabrics and styles. In the end, how to choose a hotel bathrobe has caused confusion to the purchasers of hotel bathrobes. Below, Gansu Rongjiang will introduce the common knowledge of hotel bathrobes to everyone So people can pick and choose?

A good hotel bathrobe should at least have good hygroscopicity and breathability, different materials and technology to give a person feel, as well as wear comfort may vary greatly. General texture includes Terry Cloth bathrobes, cut velvet bathrobes, waffle bathrobes, coral velvet bathrobes and other materials.

For weight, the heavier the robe, the slower it will dry out in the water if it’s too heavy, and the faster it will change. Therefore, the weight per square meter of the bathrobe is the key to measure its quality. Thick and light bathrobes are a good choice.

Most of the bathrobes are made of Cotton Terry cloth, coralline, high-grade silk and so on. Hotels usually choose Terry cloth bathrobes. This kind of bathrobe is breathable, soft and comfortable. Then from the point of view of health, the cotton bathrobe has advantages, it has a strong moisture absorption and permeability, can better absorb sweat on the skin, to prevent colds.

When choosing a hotel bathrobe, buyers should consider its style first, and then pay attention to the color, it is best to choose simple and elegant light color, because light color can play the role of peace of mind It is recommended to choose colors that are light and relaxing, such as pink, Beige and white.

Of course, size is also a very important part, when choosing the size of a hotel bathrobe, it is best to be a little looser, which will give people a sense of relaxation and comfort. When choosing a bathrobe, you can choose a belt-type waist, especially for those who are fat in the waist and abdomen And make sure your pants are loose.

It is necessary to buy quality-assured hotel bathrobes, to buy health, to buy satisfaction, Gansu Rongjiang Textile for your comfort and health escort

Proper use and storage of hotel towels

The hotel  towel class product square gram weight is relatively high, has the texture, the fleeciness and the water absorption performance are more outstanding. The word of color is given priority to with plain color, tonal more onefold, pursue contracted atmosphere. Fabric Products Count High, density, production more fine, more outstanding softness, better comfort in contact with the skin. Gansu Rongjiang wholeheartedly at your service, next, for you to comb about the towel story, the article for Reference Only, depending on the specific circumstances.

A towel is a fabric with a loop structure made up of three systems of interwoven yarns. The yarns in these three systems are wool, ground and weft yarns. With the development of science and technology, warp-knitted towel fabric appeared, this towel loop is firm, but the form is relatively simple. The vast majority of the market for woven towels.

The following Gansu Rongjiang to introduce the use of towel products, the correct use and purchase of small knowledge, so that we have a deep understanding of the hotel with towels.

1. Proper use and storage of towels

Special-purpose, special-purpose Towel: Towel easy to cause cross-infection, suggested that individuals use alone, according to the need to configure different purposes of towel products.

Correct washing and regular disinfection: towels are often in a moist state and are easy to breed harmful bacteria, mites and other micro-organisms, thus causing greater harm to our bodies, so we should always wash, sun or UV disinfection, and store it properly. Washing should pay attention to the washing method on the washing mark. When drying, hang it in a dry and ventilated place and dry it naturally with cool air or hot air. Avoid human sweat residue, Towel Brittle Damage; avoid human surface grease, dandruff residue, breeding bacteria, so that the towel has a strange smell, sticky.

Timely replacement: frequent use of towels easy to cause the ring layer of residual dirt stains, not easy to be washed clean, health indicators decline, consumers should be based on the use of time to replace in a timely manner, the proposal can be replaced once every three months, conditional replacement every two months.

2. Towel use and care:

1. cotton towel washing to avoid water temperature overheating and long time drying. In the drying, tumble drying machine can make cotton towels more fluffy and soft, and hanging dry can not achieve this effect. It is best not to expose in the sun, or use ultra-high-temperature heat forced drying.

2. Add softness. Do Not pour the detergent directly onto the towel, otherwise the detergent residue will cause the towel to harden and minimize chlorine bleach.

3.Do not use fabric softener frequently, or it will affect the water absorption of the towel.

4.Wash dark towels and light towels separately.

5. Avoid washing towels with clothes that contain zippers, hooks, or buttons that can damage towel loops.

6. Do not wash towels and clothing together, Terry cloth will be thin and soft fabric clothing wrapped inside.

7 .The number of washing times affect the use of towels time, less washing times the use of towels longer.

8. Damp towels that sit too long or don’t dry can cause mold and other bacteria. Moldy towels dry out, leaving the fibers brittle and cracking quickly. After using the towel for a period of time, the free calcium and magnesium ions in the water combine with the soap to form calcium-magnesium soap adhered to the surface of the towel and made it hard. . .

Towel purchase and daily care is fastidious, do not blindly. Choose a good towel and start at the source.

Do you know the meaning of hotel linen count density and figure

In the hotel room for guests to use the bed sheet, quilt cover, Quilt Core, Protection Pad, comfort pad, pillowcase, pillow core, towel, towel, towel, bathrobe, towel and other products, collectively referred to as “hotel cloth grass. “.

The grade of Hotel Room Linen is related to the comfort of the guest and directly affects the guest’s evaluation of the hotel. Yarn Count and yarn count density are two important parameters to describe the fabric specification. The higher the yarn count, the finer the yarn, and the higher the yarn count, the finer the fabric. Do you understand the significance of the number of yarn count?

The count is the thickness of the yarn: If a pound (454 grams) of cotton (or other constituent yarn) is 840 yards (0.9144 m / yard) in length, the count is one.

If a pound of yarn is 10,840 yards long, its fineness is 10, and so on.

The symbol for English is the letter “S”

Single Yarns are represented by 40 single yarns — 40S

The representation of strands is: 40 Strands (two laid and twisted) are both: 40S / 2

Yarn Count is the basic unit of finished cloth. The British count is a fixed weight system, so the count of the count is inversely proportional to the thickness of the yarn. The larger the count, the finer the yarn, and the better the quality of the cotton fiber. According to the thickness of bed linen cloth, it can be divided into 16S, 21S, 32S, 40S, 60S, 80S, 100S, 120S, etc. . Hotel common bedding are 40S, 60S, 80S; towels are generally 16S, 21S, 32S.

The Yarn Count is the number of warp and weft yarns per square inch (2.54 cm * 2.54 cm) of the fabric. 300T, as we often see in sheet descriptions, is the approximate sum of 173 warp yarns in a 2.54 cm wide sheet and 120 weft yarns in the same width.

The general yarn count for Warp 173 is 60S, and that for Weft 120 is 40S, so the overall description of 300T yarn count is 60 * 40 / 173 * 120

Another example: 40 * 40 / 110 * 90 means warp 40, weft 40, warp density 110, weft density 90, warp and weft density 200T (110 + 90) .

Common Yarn Density and yarn count matching parameters are as follows:

Single spray ratio

200T C40 * 40 / 110 * 90

250T C40 * 40 / 140 * 100

300T JC60 * 40 / 173 * 120(200 * 90)

350T JC60 * 80 / 173 * 156

400T JC80 * 80 / 200 * 183

Double injection ratio

250T C40 * 40 / 133 * (53 + 53)

300T JC60 * 40 / 173 * (58 + 58)

350T JC60 * 60 / 200 * (72 + 72)

400T JC60 * 80 / 200 * (90 + 90)

Five Things You Should Know About Hotel Towels

A towel used for linen in hotels，Generally, 90% cotton is used as the main material.Many of the advantages are strong water absorption, soft feel,and small static electricity and warm, heat-resistant,and the price is relatively cheap, can clean up many times to use.

What is the weave classification of towels?

Most of them are divided into two major categories. One is flat knitting, which is the most common one, and is cheap and used by most hotels. The other is Jacquard. Some star-rated hotels use jacquard to weave bath towels or carpet towels The price is relatively high.

What is the Common Towel Yarn Support Technology?

Yarn support, generally 21S or 32S pieces of yarn as the main material, in short, the less the number of yarn, yarn thicker, relatively cheap. In addition, the General Towel is a yarn will be used, but there is another way is to use two pieces of yarn and then woven, we will call double-ply. The texture will be twice as thick in the hand and the price will be relatively high.

Why is embroider  towel more expensive?

Now we use advanced embroidery machine instead of the previous manual embroidery, generally used in cotton cloth with a monochrome trademark, the process is very time-consuming, the price is relatively high.

What are the processes that affect towel durability?

Car Edge is an important part of the towel process, will affect the durability of cotton towels. General is the use of ordinary express edge, but to be durable high is three-stitch edge. Forging is another way to enhance the durability of cotton towels, but this is the same as Jacquard machine is woven with Jacquard machine, so in time and money than plain weave expensive.

Standard washing method for towel

1.Hard water softens

In the process of washing cloth and grass, wash chemicals must be used correctly. Especially in hard water areas, water softener must be added during the main washing process.

2. Master Wash

When washing white cotton fabric, want to use alkalescent stronger scour. During the washing process, be sure to dissolve the detergent thoroughly. The main wash is to be done at high temperature. White fabric should choose bleaching powder, color fabric should choose color bleaching powder.

3. Over water

In the process of washing, passing water is also very important. When cloth grass is washed, the dirt is washed down, and a mixture of detergent and dirt is formed in the water solution. The mixture is also warm at this time. Adding cold water directly to the process causes the cloth to shrink, locking the dirt of the mixture firmly into the fibers. In the long run, the cloth grass will appear dirt deposition. Dehydration, white fabric dehydration is not clean, can also cause the fabric yellowing, some washing powder, detergent, bleach and other detergents over the water will remain in the fabric fibers, this will not only cause the fabric yellowing, and it’s going to be less soft and harder. Wash white fabric if you want to clean white, must be completely dehydrated of fabric.

4. neutralize

A neutralizing acid must be added during the post-treatment. Add soft fabric powder to the right amount, too much will make the towel yellow. If you’re not dehydrated, the towels will turn gray. Long-term non-neutralizing acid will harden the towel. To make cloth and grass wash well, each washing process must be treated strictly, otherwise, as long as there is a link error, will affect the overall washing effect.

5. Softness

Towel washing needs to add the right amount of fabric soft powder, on the one hand to make the fabric soft, use up to increase the comfort, on the other hand can effectively reduce electrostatic adsorption.

How to choose hotel slippers

Slippers, not only to a trip to bring pleasure to the small joy, but also enhance the guest’s stay experience, increase the hotel goodwill.

Therefore, the hotel slippers for the details of attention is indispensable, and how to Choose Hotel Room slippers? The following aspects can not be ignored.

one. Sole

1.TPR Sole

TPR is thermoplastic rubber materials, TPR technology is divided into soft bottom, hard ground, side seam bottom, rubber bottom, ox tendon bottom, blown plastic bottom, adhesive bottom can be classified as this category.

The advantages of TPR slippers are: soft, waterproof, with a certain degree of wear resistance.

2.Eva sole

Made from a blend of ethylene (e) and vinyl Acetate (Va) , the sole is unfamiliar to many people, but not to those who travel frequently. Hotel slippers are basically made from it.

Eva Base has the advantages of firmness, light weight and easy cleaning.

At present, EVA is still the main sole used in most hotels, and the soles used in budget hotels are relatively thin, ranging from 3 mm to 5 mm. The soles of high-end hotels that value guest experience are all over 6 mm thick, and many are 8 mm or 9 mm thick Some hotels add sponges to the soles of the feet to increase their softness and improve their slip resistance.

3. Point plastic cloth sole

Point plastic cloth is not very popular in China, because many people feel inconvenient, feel not waterproof. Because the base is very skid-proof, and because of its quiet effect is still used in many high-end hotels and hospitals.

The advantages of the point plastic bottom are: soft, light, non-slip.

The Black Sandwich Uses Eva, which is harder, and the white sandwich uses a sponge, which is soft and non-slippery

4.Cloth bottom

Cloth-bottomed slippers for wood floors, soft and comfortable, very easy to clean, most directly into the washing machine on it.

5.PVC

A synthetic process in which EVA substrate is coated with a layer of leather. The outsole is also mostly made of this material.

The Comfort of hotel slippers is often in direct proportion to the level of the hotel, the higher the stay, the more money, the hotel supplies will be better. Although disposable slippers look little difference, but different material or feel of the foot is very different.

Two：Vamp

In general, small hotels and guesthouses use disposable non-woven slippers; middle-end hotels use velvet, pull plush, Short plush slippers more; High-end hotels, on the other hand, favor towels (Terry, cut, waffle) and cotton / Linen / Sardine slippers.

1.Towel and cloth

Towel cloth is not only soft and comfortable, gentle and warm, but also has excellent water absorption, for the feet to bring the use of the four seasons.

At the same time, waffle fabric shape is crisp, unique style, soft and delicate touch with excellent moisture permeability effect, so that foot skin feel comfortable and pleasant.

2.COTTON:

As one of the textile products with the longest history, cotton cloth has been loved by people for its comfortable and warm-keeping, soft and close to the skin, while slippers made of cotton cloth have a soft touch ALL-ROUND CARE for the feet running around the day.

3.SACKCLOTH:

A variety of hemp fiber plants made of linen, look slightly rough, but actually soft and comfortable, breathable and refreshing, and washable, sun-resistant, anti-corrosion, bacteriostatic features, is also a bright linen fabric slippers.”