2019年5月31日星期五

Tips for cleaning hotel towels

Lanzhou hotel supplies hotel towels mainly have six characteristics
Hotel towels are super absorbent

The microfiber USES the orange-style technology to divide the filament into eight petals, which increases the fiber surface area and the pores in the fabric.Quick absorption and quick drying are its remarkable characteristics.
02 hotel towels are strong detergents
Lanzhou hotel supplies
Fiber fineness for silk 1/10, hair 1/200, its special cross section can more effectively capture small to a few micron dust particles, decontamination, oil removal effect is very obvious.
Hotel towels do not depilate
High strength synthetic fiber filament, not easy to break, at the same time using fine weaving method, not drawn, not off the loop, fiber is not easy to fall off from the surface of the towel.Use it to make cleaning towel, car towel, especially suitable for wiping bright paint surface, electroplating surface, glass, instrument and LCD screen, etc.

Hotel towels have a long life
Because of its great strength and toughness, its service life is more than four times of the service life of ordinary towels. It does not deform after multiple washing. At the same time, polymer fibers do not hydrolyze proteins like cotton fibers.
Hotel towels are easy to clean
When ordinary towel is used, especially the natural fiber towel, the dust, grease and dirt on the surface of the wiped object are absorbed directly into the fiber, which is not easy to remove. After a long time, it will even harden and lose elasticity, affecting the use.And the super fine fiber towel is to adsorb the dirt between the fibers (not the fiber inside), plus the fiber density is high, high density, so the adsorption capacity is strong, after use only with water or a little detergent can be cleaned.
Hotel towels do not fade
The dyeing process adopts tf-215 and other dyeing agents for ultrafine fiber materials, and the indexes of slow dyeing, shifting dyeing, high temperature dispersing and achromatic are all up to the strict standards of the international market. Especially, the advantages of no fading make it completely free from the trouble of decolorizing pollution when cleaning the surface of articles.
Lanzhou hotel supplies towels washing matters
1. Water quality: it is recommended that the washing water be softened.The intensity of washing adopts relaxation washing procedure.
2, the first water is crucial: many new towels, bathrobe jump yarn related to the first water.Pilling of towels and bathrobes is related to the process of water passage.
3. First washing suggestion: washing temperature should not exceed 60℃.The main washing time is slightly shorter than the normal washing time. As the new bathrobe is almost pollution-free, it is recommended not to use softener to avoid the towel and bathrobe not absorbing water.Or with the original towel, bathrobe softener chemical reaction, resulting in the towel, bathrobe yellow, suggest washing with water.
4. Washing pretreatment: the washing products should be pre-washed before the use of chemical washing, and the impurities and weak dirt in the washing products should be washed by cold water washing and scouring.
5. Main wash: the water temperature should not exceed 75℃.At the same time, the installed capacity must be 70% to 80% of the loading capacity;Especially when the installation is obviously insufficient, it will improve the washing intensity of cloth and grass.Affects the service life of linen.
6. Bleaching: use oxygen bleaching, not chlorine bleaching.In particular, new towels and bathrobes have good water absorption, as well as good permeability to bleach solution.This link is not well controlled, the damage to the new towel, bathrobe is greater than the old towel.This is part of the hotel's new towels, bathrobe damage is one of the reasons, the new product in the release of bleach, bleaching solution must be adjusted evenly.Control temperature and PH value.
7. Water filtration: thoroughly filter the residue of detergent from towels and bathrobes.The recommended number of times of water crossing is not less than: 2 times.When washing, the excess water should be sufficient.If the washing water is not clear, the impurities, dirt and washing agents removed from the washing water will be attached to the surface of the product again, affecting the washing effect and causing damage to the fiber interior.When washing white products, try to wash the chlorine, the presence of chlorine makes excessive oxidation of the fiber, resulting in white towels yellow.

8. Drying: the drying standard is 80% drying of towel.Towels, bathrobes from the oven out, should see obvious moisture, reduce dry friction towels.This link is very important: the soft feel of the towel and bathrobe, whether it turns yellow, crisp or not, and the service life all have obvious influences.After drying, cool air is required to restore the good elasticity of towels and bathrobes.The drying temperature of cotton fiber is 80℃.
9. Dehydration: pay attention to observing the perspective mirror when shaking dry at high speed. If twining is found, stop the machine in time and shake dry after readjusting.
10. End of washing: when unloading the goods, please pay attention not to use a strong pull, because it is easy to break with a strong pull.
11. Check regularly whether there is any burr on the inner wall of the washing equipment.

没有评论:

发表评论